Wallpaper orders are by rolls; therefore, the minimum order for wallpaper is one roll unit.
First, measure the wall or walls you want to wallpaper. Then, input the measurements into our wallpaper calculator to determine the number of rolls you’ll need. We recommend rounding up and ordering a bit more to account for potential delivery time and to avoid the costs of placing a new order.
A roll of wallpaper contains 10 meters in length.
Measure the width and height of the entire wall.
If any section of the wall has varying heights, measure the highest point to cover the entire wall.
Wallpaper is printed with exact measurements, so always add a minimum of 5 cm to both width and height measurements to account for irregularities in the wall.
To install new wallpaper, the wall (or ceiling) surface should be smooth, clean, dry, and free of any imperfections. Fill any holes and sand down any imperfections. For optimal results, we recommend painting the wall beforehand with the same color as the wallpaper base.
You will need a roller, adhesive paste, a sponge, a pencil, a water bucket, a folding ruler, a tray, wallpaper knife, scissors, a brush, sandpaper, and wall putty if necessary.
For most of our wallpapers, which are non-woven we recommend choosing a pre-mixed adhesive. Ensure that the adhesive is suitable for non-woven wallpaper. Look for the “paste the wall” symbol or three triangles, indicating that the adhesive is suitable for non-woven wallpaper.
Non-woven wallpaper adhesive should be applied directly to the wall. Never apply it directly to the wallpaper, as this could cause the wallpaper to swell, making it challenging to match the pattern. For optimal results, use the adhesive at room temperature.
If you have chosen a textile wallpaper, you should use a textile adhesive paste.
Our wallpapers are as durable as wallpaper in general. However, it is not recommended to use them in an environment where they are exposed to water or oil splashes. To enhance the wallpaper’s resistance in a slightly humid environment, you can add a protective layer of water-based varnish, but we cannot guarantee complete protection. It is important for the wallpaper to be completely dry before applying varnish; we recommend waiting 1-2 days to be sure. Glass or a sheet of acrylic can also be a good way to protect the wallpaper in small areas, such as the kitchen countertop.
Our wallpapers work very well in toilets with a sink and toilet, as they have low humidity. It is not recommended for the bathroom, as the humidity in this room, with a shower or bathtub, could damage our wallpapers. To make it more resistant, you can add a protective layer of water-based varnish, but we cannot guarantee that it will provide complete protection. It is important for the wallpaper to be completely dry before applying varnish; we recommend waiting 1-2 days to be sure. Glass or a sheet of methacrylate is also a good way to protect the wallpaper in small areas, such as above the sink, as it is constantly exposed to water splashes.
No, our wallpaper is designed for indoor use only.
Many of our designs are available in fabrics, wallpapers, and cushions. Due to the different production natures of fabric and wallpaper, we cannot guarantee an exact match between them, though we always strive for harmony. When creating our collection, we carefully consider how each design will look best in the final result. Our designs are intended to mix and match, and we would be happy to advise you on a design and/or color that complements your project.
No. the adhesive paste is not included. We recommend using a quality paste for better results and longer-lasting adhesion to your wall.
Our wallpaper is washable. To clean it, use a sponge or damp cloth to gently wipe the surface. Due to the printing process, some ink residue may come off the first time the wallpaper is cleaned. However, this does not affect the actual colors of the design or the material’s quality.
Always clean the wallpaper vertically. Never apply any type of adhesive tape to the wallpaper surface, as it could compromise the integrity of the printed design on the surface.
Enter the width and height of the wall, and it will automatically calculate the number of pieces you will need.
Note: The total will be displayed in the quantity to purchase.
(You are allowed to enter measurements with two decimal places, separated by a comma).